SSM20混凝土聚脲专用封孔腻子

SSM20 concrete polyurea special sealing putty

一、产品介绍Product information

SSM20混凝土聚脲专用封孔腻子是德国Drache Handels UG 公司于二十一世纪研发的

一种聚脲改性腻子，该腻子强度高、韧性好，可操作时间长，施工性能良好，具有较

好的封孔性能和极优异的层间附着力。

SSM20 concrete polyurea special sealing putty is Drache Handels UG companyfrom Germany in the 21st century research and development The utility model relates to polyurea modified putty, which has high strength, good toughness, long operating time, good construction performance, and superior performancegood sealing properties and excellent interlayer adhesion.

二、产品特性Product characteristics

♦ 涂层无接缝、坚韧致密；

♦ 粘结力强，耐水耐碱，与基层结合牢固；

♦ 优异的抗冲击、抗碰撞、耐磨性能；

♦ 优异的耐腐蚀性和耐化学介质性能，如耐各种酸、碱、盐等介质腐蚀；

♦ 封孔效果好，可施工时间长；

♦ 找平效率高，立面不易流挂，提高施工工效；

♦ 高涂布率节约使用成本。

♦ The coating is seamless, tough and dense;

♦ Strong adhesion, water and alkali resistance, firmly combined with the base;

♦ Excellent impact resistance, collision resistance, wear resistance;

♦ Excellent corrosion resistance and chemical resistance, such as resistance to various acids, alkali, salt and other media corrosion;

♦ Good sealing effect, long construction time;

♦ High leveling efficiency, the facade is not easy to hang, improve the construction efficiency;

♦ High coating rate saves the use cost.

三、产品应用范围Product application range

该产品在欧美广泛应用于金属基层、混凝土、水泥砂浆抹面的找平、填缝、封孔处理，

尤其对环境恶劣或粘结强度要求较高的水池和屋顶面的平整处理效果更佳。       

The product is widely used in Europe and the United States in metal base, concrete, cement mortar plastering leveling, joint filling, sealing treatment,

Especially for the harsh environment or high bond strength requirements of the pool and roof surface leveling effect is better.

四、技术参数Technical parameter

（1）材料理化性能Physical and chemical properties of materials  

（2）材料物理性能Physical properties of materials   

（3）材料耐腐蚀性能Corrosion resistance of the material

五、施工注意事项Construction precautions

♦ 产品使用之前，请认真阅读产品使用说明书；

♦ 施工环境温度0℃-45℃，相对空气湿度 ≤85%，基层露点温度≥3℃为宜；

♦ 每次使用前先将涂料B组份上下搅拌均匀，使用多少、倒出多少，然后与A组份等比例混合后，再次搅拌均匀，并迅速将桶盖盖紧，倒出来的涂料须在60分钟内用完。使用剩余的产品不可倒回原包装桶；

♦ 请勿加入有机溶剂或其他涂料一起使用；

♦ 混凝土表面：应确保基层表面结实完好、干净，清除基层表面的油污、霉菌、灰尘及其他松散物，使之坚固干燥；

♦ 用批嵌工具进行刮涂施工；

♦ 严格按照比例配制，将A,B组份充分搅拌均匀后，再添加石英砂或石英粉，再一次充分搅拌均匀后进行使用；

♦产品保质期：12个月（未开封），储存环境温度：5℃-35℃，请在阴凉、通风的环境下储存，避免阳光直射，远离热源。

♦产品包装：10公斤/桶

♦ Before using the product, please read the product manual carefully;

♦ Construction ambient temperature 0℃-45℃, relative air humidity ≤85%, base dew point temperature ≥3℃ is appropriate;

♦ Before each use, the paint B component is stirred up and down, how much is used, how much is poured out, and then mixed with A component in equal proportion, stirring again, and quickly cover the bucket tightly, the poured paint must be used up within 60 minutes. The remaining products can not be poured back into the original packaging bucket;

♦ Do not use with organic solvents or other coatings;

♦ Concrete surface: Ensure that the base surface is solid and clean, remove oil, mold, dust and other loose matter on the base surface, and make it strong and dry;

♦ Scrape and paint with batch tools;

♦ Preparation in strict accordance with the proportion, the A and B components are fully stirred, and then quartz sand or quartz powder is added, and then fully stirred again for use;

♦ Shelf life: 12 months (unopened), storage environment temperature: 5℃-35℃, please store in a cool and ventilated environment, avoid direct sunlight, away from heat sources.

♦ Product packaging: 10 kg/barrel

六、诚信声明Statement of good faith

圣士曼公司承诺以上所列各项产品数据是在相关实验室相对应标准测试获取，测试过程中相关数据会因测试环境和方法不同而结果略有差异。因此圣士曼公司建议客户使用该产品前做好实地考察论证。除产品质量本身外，圣士曼公司不承担任何责任并保证对以上数据进行调整和更新而不提前告知的权利，并请谅解。

The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.